Horizontal Glass Washing
& Drying Machine
Spotless glass, every pass, every time. Self-adjusting brushes, dual air-knife drying, closed-loop water — production-line washing at up to 10m/min for coated, Low-E, and uncoated glass.
How It Works
Eight stages from dirty glass infeed to spot-free dry outfeed — self-adjusting brushes, dual air knives.
Spotless. Every Pass.
Self-adjusting brushes, dual air knives, closed-loop water — production-line cleaning for every glass type.
Extended Roller Spans
Reinforced frame with extended roller spans supports oversized architectural glass panels up to ~4,000mm wide without sagging or misfeeds. Stronger drive system ensures consistent speed across the full width.
3–4 Self-Adjusting Brush Sets
Additional brush sets compared to the standard horizontal washer ensure full-width coverage for jumbo-size panels. Self-adjusting brushes accommodate glass thickness from 3–19mm without manual changeover.
Stainless Steel Wash & Dry Sections
All wash and dry sections are built from stainless steel for corrosion resistance and long-term durability, even in high-volume production environments handling varied glass types.
Consistent Output at Production Speed
Delivers streak-free, spot-free cleaning on oversized panels at line speed — the same quality as standard-width washers, just wider.
PLC + Touchscreen HMI Control
Full PLC control with touchscreen HMI for independent adjustment of brush speed, water temperature, conveyor speed, air-knife pressure, and detergent dosing per zone.
Production Line Integration
Designed to integrate directly into tempering lines and lamination lines — infeed from cutting/edging, outfeed to tempering furnace or stacking.
Technical Specs
Complete specifications for the Jumbo Size Glass Washing Machine.
Full Specifications
17 parametersConfiguration Comparison
Side-by-side comparison of all three Horizontal Washer configurations.
What It Washes
From IG lines to tempering furnaces — spot-free glass for every downstream process.
Curtain Wall Glass
Oversized architectural panels
Curtain wall glass panels are increasingly large, often exceeding 3,000mm in width. The Jumbo Washer handles these oversized panels without sagging or misfeeds, delivering consistent cleaning across the full width.
Choose Your Configuration
Three tiers from basic washing to full production-line integration with DI rinse.
Jumbo-W1 Standard
3,500mm Width, 3 Brush SetsJumbo-W2 Professional
4,000mm Width, 4 Brush SetsJumbo-W3 Enterprise
4,000mm, Full Automation, Line IntegrationKeep It Running
Five essential maintenance practices to maximize brush life, water quality, and drying performance.
Inspect all brush sets for wear or glazing on the full 4,000mm width. Clean glass particles from rollers and tanks. Verify water cooling and filtration flow.
Check reinforced frame for any stress or deformation. Verify drive motor performance across extended roller spans. Lubricate all linear guide rails and ball screws.
Verify PLC communication with adjacent line equipment. Check all sensor readings across the full width. Clean touchscreen HMI. Back up all programs.
Inspect all brush spindle bearings for play or noise. Check air-knife alignment and blower performance. Inspect conveyor drive motor and rollers.
Complete machine calibration using precision measurement tools across the full 4,000mm width. Verify all axes, brush concentricity, air-knife pressure, water filtration, and safety systems.
Common Questions
Everything you need to know about the Horizontal Glass Washing & Drying Machine.
The standard configuration handles up to ~4,000mm wide glass panels — covering the largest architectural curtain wall and facade panels. Custom wider formats are available on request.
Yes — the automatic thickness adjustment system detects each panel's thickness (3–19mm) and adjusts brush pressure and conveyor speed accordingly. Mixed batches run seamlessly.
The Jumbo Washer has extended roller spans and a reinforced frame to support oversized panels without sagging. It also has 3–4 brush sets for full-width coverage, compared to 2–3 on the standard washer.
Yes — the Jumbo Washer is designed for production line integration, sitting between the edging and tempering stations. The control interface matches HANWIN's other series for seamless line connectivity.
Get a Quote
Tell us about your production line washing requirements and we'll recommend the right configuration.
Contact Information
Pre-configured for Jumbo Washing
Your enquiry is pre-tagged for our Horizontal Glass Washing & Drying Machine. Include your glass types, panel width, thickness range, line speed requirements, and whether you need Low-E compatibility for a faster response.
Wash. Dry. Ready.
The production-line workhorse — self-adjusting brushes, dual air-knife drying, closed-loop water. Spot-free glass at up to 10m/min for coated, Low-E, and uncoated glass. Ready for IG, tempering, and laminating lines.