Horizontal Glass Washing
& Drying Machine
Spotless glass, every pass, every time. Self-adjusting brushes, dual air-knife drying, closed-loop water — production-line washing at up to 10m/min for coated, Low-E, and uncoated glass.
How It Works
Eight stages from dirty glass infeed to spot-free dry outfeed — self-adjusting brushes, dual air knives.
Spotless. Every Pass.
Self-adjusting brushes, dual air knives, closed-loop water — production-line cleaning for every glass type.
Direct On-Line Integration
Mechanically linked to the edging machine so glass moves straight from edging into washing without a manual transfer. Keeps panels on a single continuous conveyor path.
Automatic Thickness Adjustment
Self-adjusting brush pressure and conveyor speed accommodate mixed IGU batches from 3–19mm without manual changeover. One setup handles every panel.
Consistent IG Output
Delivers streak-free, spot-free glass directly into IG sealing stations, ensuring consistent seal quality and reducing rework from contamination defects.
PLC-Controlled Synchronization
PLC connectivity with the adjacent edger ensures synchronized speeds and prevents bottlenecks or glass stacking at the interface between the two machines.
Closed-Loop Water System
Self-circulating water with 50μm + 10μm filtration across all zones. Automatic dosing, level control, and overflow protection keep water quality high and consumption low.
Low-E Safe Brushes
Standard soft nylon or polyester brush sets clean coated, Low-E, and online-coated glass safely — no upgrade needed for sensitive glass types.
Technical Specs
Complete specifications for the IGU Line Washer.
Full Specifications
15 parametersConfiguration Comparison
Side-by-side comparison of all three Horizontal Washer configurations.
What It Washes
From IG lines to tempering furnaces — spot-free glass for every downstream process.
IGU Production Lines
Direct on-line washing before sealing
The IGU Line Washer sits directly ahead of the IG assembly line, delivering clean, dry glass straight into the sealing station. Automatic thickness adjustment handles mixed IGU batches seamlessly.
Choose Your Configuration
Three tiers from basic washing to full production-line integration with DI rinse.
IGU-W1 Standard
Horizontal, 3,000mm WidthIGU-W2 Professional
Vertical, 2,500mm WidthIGU-W3 Enterprise
Wide-Body, 3,300mm, Full AutomationKeep It Running
Five essential maintenance practices to maximize brush life, water quality, and drying performance.
Inspect all brush sets for wear or glazing. Clean glass particles from rollers and tanks. Verify water cooling and filtration flow. Check air-knife pressure and blower operation.
Verify automatic thickness adjustment across the full 3–19mm range. Calibrate brush pressure sensors. Check conveyor speed synchronization with adjacent edger.
Verify PLC communication with adjacent line equipment. Check all sensor readings (thickness, speed, pressure). Clean touchscreen HMI. Back up all programs and configurations.
Inspect all brush spindle bearings for play or noise. Check air-knife alignment and blower performance. Inspect conveyor drive motor and rollers. Check all electrical connections.
Complete machine calibration using precision measurement tools. Verify all axes, brush concentricity, air-knife pressure, water filtration, and safety systems. Full CE compliance check.
Common Questions
Everything you need to know about the Horizontal Glass Washing & Drying Machine.
Yes — the automatic thickness adjustment system detects each panel's thickness (3–19mm) and adjusts brush pressure and conveyor speed accordingly. Mixed batches with different glass thicknesses run seamlessly without manual changeover.
The IGU Line Washer is mechanically linked to the upstream edging machine via a shared roller conveyor system. PLC connectivity ensures synchronized speeds so glass flows directly from edging into washing without manual transfer or bottlenecks.
The standard configuration handles up to ~3,300mm wide glass — covering most architectural and IGU panel sizes. The G-IGU-W3 Enterprise extends to wider formats on request.
Yes — standard soft nylon or polyester brush sets are Low-E safe and handle coated, soft-coat Low-E, and online-coated glass without any upgrade. The gentle brush pressure protects delicate coatings.
Get a Quote
Tell us about your production line washing requirements and we'll recommend the right configuration.
Contact Information
Pre-configured for IGU Line
Your enquiry is pre-tagged for our Horizontal Glass Washing & Drying Machine. Include your glass types, panel width, thickness range, line speed requirements, and whether you need Low-E compatibility for a faster response.
Wash. Dry. Ready.
The production-line workhorse — self-adjusting brushes, dual air-knife drying, closed-loop water. Spot-free glass at up to 10m/min for coated, Low-E, and uncoated glass. Ready for IG, tempering, and laminating lines.