EVA Laminating Machine
No autoclave needed. EVA interlayer lamination at 100–140°C. 2.5+ layers. ±2°C uniformity. Safety glass for facades, overhead, decorative, acoustic, and security applications.
How It Works
Six stages from glass layup to finished laminate — vacuum, heat, press, cool — no autoclave required.
No Autoclave. Full Safety. Optical Clarity.
EVA interlayer lamination — simpler, faster, and more energy-efficient than PVB autoclave systems.
No Autoclave Required
Unlike PVB lamination which requires an expensive, energy-intensive autoclave (high pressure + high temperature over many hours), EVA lamination occurs in a single-stage vacuum hot-press at 100–140°C. This eliminates the autoclave entirely — reducing capital cost by 40%, floor space by 50%, and energy consumption by 60% compared to PVB autoclave lines.
2.5+ Layer Capability
Processes simple 2-layer safety glass (glass + EVA + glass) through complex multi-layer assemblies (glass + EVA + glass + EVA + glass) — enabling bullet-resistant, acoustic, decorative, and specialty laminates. The 60mm maximum stack height accommodates thick assemblies with multiple interlayers.
±2°C Platen Uniformity
Four to six independent heating zones in the precision-ground aluminum platens maintain ±2°C temperature uniformity across the full 2600×3800mm surface. This uniformity is critical: uneven temperature causes inconsistent EVA cross-linking, resulting in bubbles, delamination, and optical defects.
Full Vacuum System
The rotary vane vacuum pump achieves –0.08 to –0.095 MPa inside the silicone bag — removing all air from the interlayer interfaces before heating. This prevents bubble formation, ensures complete interlayer wetting, and produces optically clear laminates. Vacuum is maintained throughout the heating and cooling cycle.
50+ Recipe Profiles
The PLC stores 50+ complete lamination profiles — each with programmable heating rate, temperature setpoint, holding time, cooling rate, vacuum pressure, and pressing force. Switch between glass types, interlayer thicknesses, and layer configurations with one-touch recipe recall. Full data logging for quality traceability.
EN 14449 / ASTM C1172
The lamination process and quality output meet EN 14449 (laminated glass), EN ISO 12543 (laminated glass components), and ASTM C1172 (laminated glass standard) — the international standards for safety laminated glass. Process parameters are pre-programmed for standard compliance.
Technical Specs
Complete specifications for the EVA Laminating Machine range — 55 parameters.
Full Specifications
65 parametersConfiguration Comparison
Side-by-side comparison of all three EVA Laminating configurations.
What It Laminates
From architectural safety glass to bullet-resistant security — EVA lamination for every application.
Architectural Safety Glass
Facade & Overhead Laminates
Laminated safety glass is mandatory for overhead, skylight, facade, and curtain wall applications where glass breakage poses a safety risk. The EVA interlayer holds fragments in place upon breakage, preventing dangerous shard dispersion. EVA's moisture resistance makes it ideal for exposed facade applications.
Choose Your Configuration
Three tiers — from basic 2-layer to fully automated multi-layer lamination.
Maintenance Guide
Vacuum bag care, platen cleaning, hydraulic service — keep your EVA laminator running at peak.
Inspect the silicone vacuum bag for tears, punctures, or permanent deformation. Check bag edges for seal integrity. Test vacuum pump operation — confirm –0.08 MPa minimum within 5 minutes. Inspect platen surfaces for scratches, EVA residue, or damage. Clean platen surfaces with approved solvent. Check hydraulic oil level and system pressure. Verify cooling water temperature and flow rate. Test all safety interlocks.
Frequently Asked Questions
Answers to common queries about EVA lamination, interlayer options, and safety certification.
Get a Quote
Tell us about your EVA lamination requirements and we will respond within 24 hours.
Ready to Add EVA Lamination to Your Line?
Get a tailored recommendation for the EVA Laminating Machine that fits your production needs, glass sizes, and layer requirements.